DVALI S weighbridge series
60 Ton DVALI S Truck Scale
The 60 Ton DVALI S Truck Scale is a steel weighbridge intended for businesses that need dependable daily weighing of larger commercial vehicles with longer platform requirements. It is designed for operations where stable structure, practical system configuration, and straightforward site integration matter.
Standard system supply for the 60 ton range includes SC 20 load cells, PWI-D indicator, SC-EL mounting kit, and a 5-year warranty.
- 60 ton truck scale for routine commercial vehicle weighing
- Steel deck with I-beam structure
- Platform lengths from 14 m to 24 m
- Suitable for pit or pitless installation
- Standard SC 20 load cells
- Standard PWI-D indicator
- Prepared for daily site use
- 5-year warranty
Overview
Built for longer vehicles and broader platform needs
The 60 ton DVALI S truck scale is positioned for operations that need more weighing length than smaller truck scale models while still keeping a practical daily-use steel platform direction. It is suitable for sites where vehicle size, axle spread, and traffic pattern require a longer weighbridge layout.
This range is available in lengths from 14 m to 24 m and can be adapted to pitless or pit installation depending on the project. It can also be configured with different load cell and indicator directions where the site requires specific reporting, communication, or weighing workflow arrangements.
System highlights
Platform, standard load cell, standard indicator, and mounting kit
Below is the standard technical direction used for the 60 ton DVALI S range, including the steel platform structure, SC 20 weighing sensor, PWI-D indicator, and SC-EL mounting arrangement.
Platform structure
The 60 ton DVALI S platform uses a steel deck and I-beam structural direction intended for repeated industrial truck traffic. This gives the range a stronger fit for longer platform requirements and routine vehicle flow on active sites.
Because the 60 ton range covers a wider platform span than smaller models, it is often selected where buyers need more flexibility in matching the weighbridge length to their actual vehicle types and site approach geometry.
Need a heavier-duty platform direction? See heavier-duty alternatives.
Standard load cell: SC 20
SC 20 is the standard load cell used on this 60 ton truck scale range. It is applied where a dependable compression-type weighing sensor is needed for day-to-day weighbridge operation in demanding site environments.
Its sealed construction, certified performance, and industrial protection level make it suitable for truck scale systems where long-term service conditions are just as important as measurement performance.
- Capacity: 20,000 kg
- Minimum division: 2400 g
- Overload capacity: 30,000 kg
- Accuracy class: C3
- OIML R60 certified
Need other load cell options? Explore truck scale load cells.
Standard indicator: PWI-D
PWI-D is the standard desktop indicator supplied with the 60 ton DVALI S weighing system. It is intended for core truck scale weighing functions and basic connection to wider site recording or control arrangements.
For projects where weighing data, remote display, or different communication requirements become more important, this standard direction can also act as a starting point before moving to a broader indicator setup.
- Accuracy class: 7000d (III)
- Standard communication: RS232
- Supports up to 8 load cells (350 ohm)
- Housing: plastic, IP54
- Adjustable Modbus protocol
Need more indicator options? Explore truck scale indicators.
Mounting kit: SC-EL
SC-EL is the mounting kit paired with the standard SC load cell arrangement on this range. Its function is to support measurement stability and help the weighing system deal with vibration, shock, and movement conditions that can occur in truck scale service.
- Provides stable measurement in vibration-prone or shock-loaded systems
- Protects the load cell from impact loads
- Eliminates problems caused by thermal expansion
- Corrects possible axis misalignment
- Includes a grounding cable for protection against stray currents
See more on SC-EL mounting kit.
Model matrix
Available 60 ton models
Review the standard 60 ton model directions below by platform length and basic product details.
| Capacity | Model name | Model code | Platform dimensions | Platform | Product datasheet |
|---|---|---|---|---|---|
| 60T | DVALI S Truck Scale 60 Ton - 3 × 14 m | 060T-Dvali-S-0314 | 3 × 14 m | Steel | Request 3 × 14 m datasheet |
| 60T | DVALI S Truck Scale 60 Ton - 3 × 16 m | 060T-Dvali-S-0316 | 3 × 16 m | Steel | Request 3 × 16 m datasheet |
| 60T | DVALI S Truck Scale 60 Ton - 3 × 18 m | 060T-Dvali-S-0318 | 3 × 18 m | Steel | Request 3 × 18 m datasheet |
| 60T | DVALI S Truck Scale 60 Ton - 3 × 20 m | 060T-Dvali-S-0320 | 3 × 20 m | Steel | Request 3 × 20 m datasheet |
| 60T | DVALI S Truck Scale 60 Ton - 3 × 24 m | 060T-Dvali-S-0324 | 3 × 24 m | Steel | Request 3 × 24 m datasheet |
Configuration guide
How to choose the right 60 ton configuration
The correct 60 ton truck scale setup depends on more than rated capacity alone. Platform length, site approach, vehicle mix, and reporting needs all influence the right project direction.
What platform length do you need?
Vehicle size and weighing position
The correct platform length should match the real trucks using the scale, especially the axle spread and the usable positioning area needed for safe and repeatable weighing during normal site traffic.
Should you choose pit or pitless installation?
Site layout and construction limits
Pitless installation is often preferred where the site allows ramps and approach distance, while a pit arrangement can be more suitable where the project needs a lower-profile vehicle entry or tighter overall site length.
Which weighing system fits your operation?
Data flow and control requirements
The weighing system should be selected according to the required indicator functions, data transfer direction, reporting level, and any software or traffic-control elements planned for the site.
What support do you receive after installation?
Installation, calibration, and service follow-up
Long-term project value depends on more than the platform itself. Installation, calibration, repair response, and ongoing technical support are all important parts of keeping a truck scale working correctly after delivery.
Optional add-ons
Optional systems for the 60 ton range
The standard 60 ton configuration can also be discussed with additional systems where the project needs more control, visibility, automation, or integration.
Proof gallery
Photos, structure, and installation
Product and installation images of the 60 ton DVALI S truck scale range.
Industries & applications
Explore all industries
Industries and applications for the 60 ton range
The 60 ton class is relevant for sites that need longer truck weighing layouts, regular material movement checks, and routine inbound/outbound vehicle control.
Wine, Spirits & Beverage Production
A 60 ton truck scale can support larger delivery and dispatch movements, vehicle control, and weighing records in beverage-production environments with frequent truck activity.
Project examples: KTW, Schuchmann, Bolero, DWC
Poultry, Eggs & Protein Production
This capacity level can be suitable for feed logistics, production-site truck control, and routine dispatch weighing where larger vehicle movement is part of daily operations.
Project examples: Kumisi Poultry, Poultry Georgia Koda, Chirina, Noste
Need the broader sector overview?
Open the industries page to see how DVALI connects truck scale solutions to wider production, agriculture, materials, and logistics environments.
FAQ
Frequently asked questions
What kind of operation is the 60 ton DVALI S truck scale suited for?
The 60 ton DVALI S model is suited to sites that need routine truck weighing for larger commercial vehicles and longer weighbridge layouts than smaller truck scale classes.
What platform lengths are available for the 60 ton model?
The 60 ton range is available in platform lengths from 14 m to 24 m.
Can this model be installed as pitless or pit type?
Yes. The 60 ton DVALI S truck scale can be planned for either pitless or pit installation depending on the site layout and civil works conditions.
Which components are included in the standard weighing system?
The standard weighing system includes SC 20 load cells, the PWI-D indicator, and the SC-EL mounting kit.
Why is the SC-EL mounting kit important on this range?
SC-EL is used to support stable measurement, reduce the effect of shock and vibration, and help the weighing system operate correctly under demanding site conditions.
What warranty is offered with the 60 ton DVALI S truck scale?
This model is supplied with a 5-year warranty.
Request a quote
Request your 60 ton truck scale configuration
Send your preferred platform length, installation direction, site details, and any add-on requirements so DVALI can help prepare the right 60 ton truck scale solution for your operation.