Load Cells
Digital compression type · 10 t to 20 t
The SCD digital load cell is designed for high-capacity electronic weighing and force measurement in industrial environments. Its robust structure is developed for resistance against side loads and overloads, while its digital system supports angle compensation, communication, and fault reporting for demanding weighing applications.
The source describes this model as a digital load cell developed for truck scales where platform inclination and seasonal length changes can affect measurement accuracy. The stated angle compensation system measures deviation from the vertical axis through sensors to help maintain accurate weighing.
The source also states that the load cell provides error and warning flags so the connected master device can detect normal operation and take action in fault conditions.
| Model | Capacity | Minimum division |
|---|---|---|
| SCD 10 | 10,000 kg | 250 g |
| SCD 20 | 20,000 kg | 500 g |
| Specification | Unit | Value |
|---|---|---|
| Maximum capacity (Emax) | kg | 10,000 / 20,000 |
| Accuracy class (OIML R60) | - | C3 / C6 / C10 |
| Maximum number of intervals | - | 3000 / 6000 / 10000 |
| Minimum measurement interval | - | Emax/25000 / Emax/30000 / Emax/40000 |
| Combined error | % | ≤ ±0.04 / ≤ ±0.02 / ≤ ±0.012 |
| Return to zero error (DR) | %Emax | ≤ ±0.020 / ≤ ±0.015 / ≤ ±0.005 |
| Overload capacity | %Emax | 150 |
| Side overload capacity | %Emax | 100 |
| Breaking load | %Emax | 300 |
| Deflection at Emax | mm | ≤ 0.3 |
| Supply voltage (Umax) | V | 12-24 |
| Supply current | mA | 100 |
| Output value at nominal load | count | 200000 |
| Analog / digital converter | bit | 24 |
| Analog / digital conversion speed | Hz | Configurable between 6 and 800 |
| Asynchronous communication speed | baud | CANOpen 500 kbps, Modbus 115.200 kbps |
| Data interface | half duplex | CANOpen or Modbus |
| Angle measurement error | degree | 0.1 |
| Isolation voltage | V | 2500 |
| Compensated temperature range | °C | -10 to +40 |
| Operating temperature range | °C | -40 to +70 |
| Protection class | - | IP68 |
| Weight | kg | 8 |
| Package dimensions / weight | cm / kg | 25 x 25 x 18 / 10.3 |
The source describes a corrosion-resistant painted body with a welded stainless steel cap over the measurement area, plus full IP68 water protection for severe industrial conditions.
The source page shows technical drawings for this model, but no final DVALI tracked PDF filename has been provided yet.
Contact us to receive the correct technical drawing or configuration support.
SCD is a digital compression load cell for high-capacity electronic weighing and force measurement applications.
The model range includes 10,000 kg and 20,000 kg versions.
It is used in high-capacity truck scales, platform scales, tank weighing systems, automatic weighing instruments, and process measurement applications.
The source lists CANBUS / RS485 communication, with CANOpen or Modbus data interface options.
The protection class is IP68.
Send your required capacity, system type, and installation details, and we will help you review the right SCD configuration.